|
|
 |
|
|
|
The
Hydromatic 218 SYSTEM is specifically designed to meet the demands of residential
wastewater and sewage applications. The SYSTEM includes the Hydromatic Model SKV40AW1,
4/10 HP, 115 volt sewage ejector, 2" solids handling, 2" NPT discharge.
The SKV40AW1 can handle capacities up to 80 gallons per minute and heads up to
19 feet. The SKV40AW1 features heavy duty cast iron construction with an oil-filled
motor for cooler operation, permanent lubrication of the bearings and a longer,
trouble-free pump life. The SKV40AW1 features a wide-angle piggyback float switch
for reliable automatic operation. The 218 SYSTEM also includes Hydromatic's 218
Sewage Basin.
The 218 SYSTEM is nestable for conserving storage space and reducing shipping
costs. This super strong structural foam basin
is impact resistant and corrosion proof. Extra strong upper
flange prevents deflection during installation. The 218 Basin comes complete
with all the fittings, schedule 80 piping, swing check
valve, grommets, o-rings, gasket material and hardware
required so the plumber always has the complete package at the job site.
Download PDF Sales Sheet |
| |
| Superior Features: |
| • Package includes basin, cover, check valve, discharge pipe, gasket package
and pump |
| • Features the SKV40,
4/10 HP, 2” solids handling sewage ejector with
recessed impeller |
| • 18”x30”
basin for greater capacity, reduced cycling and extended
pump life |
| • Non-corrosive
structural foam construction for high-impact resistance |
| • Unique Hydromatic
molded footprint provides pump stability |
| |
| Specifications: |
| Typical Application: |
Sewage, high-capacity sump, effluent |
| Capacities: |
up to 78 GPM (4.9 LPS) |
| Heads: |
up to 19.5 ft. (5.9 m) |
| Electrical: |
115V, 1ø, 12.6 FLA, 60Hz;
230V, 1ø, 6.4 FLA, 60Hz |
| Motor: |
4/10 HP split phase with thermal overload protection, 1750 RPM |
| Minimum Recommended Sump Diameter: |
Simplex = 18" (457.2 mm)
Duplex = 30" (762.0 mm) |
| Automatic Operation: |
SKV40AW = Wide-angle float switch
SKV40AD - Diaphragm pressure switch |
| Materials of Construction: |
Class 30 cast iron |
| Impeller: |
Thermoplastic recessed |
| Discharge Size: |
2" (50.8 mm) NPT |
| Solids Handling: |
2" (50.8 mm) |
| Power Cord: |
10', SJTW (20' optional) |
| |
 |
|
| Specifications:
Hydromatic reserves the right to make
revisions to its products and their specifications, this catalog
and related information without notice. |
|
