|
|
 |
|
|
The Hydromatic HPGR200 submersible sewage grinder pump is
specifically designed to meet the demands of residential wastewater
and sewage applications, and the quality standard of the professional
plumbing contractor. The HPGR200 is ideal for “high head”
applications involving single-family residences and cottages.
The 1-1/4 inch NPT discharge pump is available with a vertical
discharge and can handle capacities up to 58 gallons per minute
and heads up to 105 feet.
The HPGR200 has a powerful 2 HP oil-filled motor, available
in single phase, to provide superior cooling and lubrication,
allowing the motor to provide years of trouble-free service.
The heavy duty ball bearings upper (radial) and lower (thrust)
are continuously lubricated by oil to insure a long service
life.
Hydromatic’s HPGR200 does not require any control panels
or liquid level controls to operate the HPGR200 grinder pump
in manual mode. Hydromatic’s HPGR200A2 grinder comes
complete with 2 HP listed wide angle piggyback float switch
for automatic operations. Complete “packaged systems”
featuring the HPGR200, are also available from Hydromatic
to make installation quick and simple. When it comes to submersible
sewage grinder pumps, trust the leader....Hydromatic.
| Superior
Features: |
| •Hydromatic® patented dual cutter
design |
| •Carbon/Ceramic type 2100 mechanical
seal |
| •Oil-filled motor with automatic
reset thermal overload for maximum protection |
| •Upper and lower ball-bearing construction |
| •Piggyback plug available for easy
maintenance |
| •Self-adjusting cutters, no need to shim or reset |
| |
| Download
PDF Sales Sheet |
| Download
PDF Manual |
| Download
Specification Submittal Data |
|
Specifications:
| Typical Application: |
High-capacity automatic sewage grinder |
| Capacities: |
up to
58 GPM
(3.7 LPS) |
| Heads: |
up to
105 ft. (32.0 m) |
| Electrical: |
230V,
1ø, 15 FLA, 60Hz |
| Motor: |
2HP
1ø PSC with start capacitor and thermal overload
protection, 3450 RPM |
| Minimum
Recommended Sump Diameter: |
Simplex
= 24" (609.6 mm)
Duplex = 30" (762.0 mm) |
Automatic
Operation:
|
Wide-angle float switch (manual available) |
| Materials
of Construction: |
Class
30 cast iron |
| Impeller: |
Engineered Valox |
| Discharge
Size: |
1-1/4”
(38.1 mm) |
| Solids
Handling: |
Residential
wastewater and sewage |
| Power
Cord: |
20',
STD; SJOW/SJOW-A; water resistant 600V 140°F ( 60°C) |
| |
|
 |
| |
Hydromatic reserves the right to make
revisions to its products and their specifications, this catalog
and related information without notice. Most models are UL
Listed and/or CSA Approved. |
|
