|
|
 |
|
|
| Superior
Features: |
| • 2HP; single-phase, 230V; 3-phase, 230/460V |
| • Superior "grinding" capabilities |
| • High-torque, capacitor start/capacitor run motor |
| • Dry-wound motor, better efficiency and serviceable, thermal overload protected |
| • Temperature rated at 105°F (41°C) |
| • Dual shaft seals - silicon carbide/silicon carbide and carbon/ceramic |
| • Dual cutter design - stainless steel |
| • Cast iron 10-vane impeller |
| • Upper and lower "shielded" ball bearings |
| • Retrofittable with ALL major competitors |
| • Double-cord strain relief |
| • Replaceable 20' (6 m), jacketed SOW power cord |
| • 16 AWG (1-phase) |
| • 14 AWG (3-phase) |
| |
| Download
PDF Manual |
| |
|
Specifications:
| Typical Application: |
Sewage grinding, effluent and wastewater removal |
| Capacities: |
42 GPM
(2.7 LPS) |
| Heads: |
105 ft. (32.0 m) |
| Continuous Liquid Temp: |
105°F (41°C) |
| Motor Electrical Data: |
2 HP, dry-wound, cap. start/cap. run, thermal overload protected, 230V, 1ø, 60Hz, 13.4 FLA; 230/460V, 3ø, 60Hz, 8.2/4.1 FLA |
| Discharge: |
1-1/4" (31.75 mm) NPT |
Sump Diameter
Duplex:
|
36" |
| Motor Housing: |
Cast iron |
| Impeller: |
Cast iron, 10-vane |
| Power Cord: |
20' (6 m) |
| Shaft Seal Standard: |
Dual mechanical seal |
| Pump, Motor Shaft: |
Stainless steel |
| Cutters: |
Stainless steel, 440C hardened to 55-60 Rockwell "C", dual cutters |
| |
|
| Performance: |
 |
| |
Hydromatic reserves the right to make
revisions to its products and their specifications, this catalog
and related information without notice. |
|
