Hydromatic Pump

Superior Features:

•Carbon/Ceramic type 21 mechanical seal

•Oil-filled motor with automatic reset thermal overload for maximum protection (one phase models)

•Upper & lower ball-bearing construction

•Piggyback plug available for easy maintenance and switch replacement

•Capacitor start for increased starting torque (one phase models)

Specifications:

Typical Application:	High-head effluent and dewatering
Capacities:	up to 88 GPM (5.5 LPS)
Heads:	up to 90 ft. (27.4 m)
Electrical:	208V, 1ø, 13.6 FLA, 60Hz 230V, 1ø, 12.1 FLA, 60Hz 230V, 3ø, 5.8 FLA, 60Hz 460V, 3ø, 2.8 FLA, 60Hz 575V, 3ø, 1.9 FLA, 60Hz
Motor:	(Single Phase) - 1 HP split phase with start capacitor and thermal overload protection, 3450 RPM; (Three Phase) - 1 HP polyphase, 3450 RPM
Intermittent Liquip Temp:	140°F (60°C)
Minimum Recommended Sump Diameter:	Simplex = 24" (609.6 mm) Duplex = 30" (762 mm)
Automatic Operation:	Wide-angle float switch (1ø only, manual available)
Materials of Construction:	Class 30 cast iron
Impeller:	Thermoplastic
Discharge Size:	2” NPT (50.8 mm)
Solids Handling:	3/4” (19.1 mm)
Power Cord:	1ø - 20', SJTW, STW-A (30' optional) 3ø - 20', STW-A (30' optional)

Performance:

Hydromatic reserves the right to make revisions to its products and their specifications, this catalog and related information without notice.